Post questions, share ideas and techniques relating to 3D prototyping and milling
-
paolo8453
- Silver Member
- Posts: 109
- Joined: Sat Feb 25, 2012 11:27 am
Post
by paolo8453 » Tue Jun 25, 2019 5:44 pm
I'll post this for any future visitors to the forum. Or any visitors from the future!
Anyone that is breaking a TS-400 give me a shout as I'm after a main board.
Cheers
Hardware: TS-400 which seems to be the same as an EGX-400/600...
-
Allan S.
- Member
- Posts: 13
- Joined: Sun Sep 30, 2018 7:48 pm
Post
by Allan S. » Sun Jul 28, 2019 11:41 pm
Hi Paolo,
doesn't sound good....what is the nature of the problem?
Regards,
Allan
-
paolo8453
- Silver Member
- Posts: 109
- Joined: Sat Feb 25, 2012 11:27 am
Post
by paolo8453 » Mon Sep 02, 2019 5:27 pm
The main board doesn't power up. Power actually comes via the spindle board but I've swapped the spindle board out for a known working one and still nothing.
The main board is pristine with no damage or dodgy soldering to be seen anywhere. It just stopped working.
If I could get the spec for the brushless motors from Roland I'd just do a retrofit with some drivers and motion controller.
Hardware: TS-400 which seems to be the same as an EGX-400/600...
-
paolo8453
- Silver Member
- Posts: 109
- Joined: Sat Feb 25, 2012 11:27 am
Post
by paolo8453 » Wed Sep 04, 2019 1:01 pm
UPDATE - Roland flatly refuse to give the specs of the motors. This machine was obsolete long ago so what's the problem with giving out useful information? I guess they'd rather users just skip their old machines rather than fix them. I expected more from Roland...
Hardware: TS-400 which seems to be the same as an EGX-400/600...
-
ottoman
- Member
- Posts: 1
- Joined: Tue Oct 15, 2019 6:01 pm
Post
by ottoman » Thu Oct 17, 2019 7:10 pm
Could you send pictures of the board?
To see what can be done.
-
paolo8453
- Silver Member
- Posts: 109
- Joined: Sat Feb 25, 2012 11:27 am
Post
by paolo8453 » Thu Oct 17, 2019 7:21 pm
The board is immaculate - I don't have it just now as someones having a look at it. Possibly an issue with the main processor...
Hardware: TS-400 which seems to be the same as an EGX-400/600...
Who is online
Users browsing this forum: No registered users and 1 guest